Online Only
YHM SRX QD Flash Hider 5/8×24 Thread
YHM SRX QD Flash Hider 5/8×24 Thread
$84.75
Disclaimer: It is the customer’s responsibility to ensure that all orders comply with applicable local and federal regulations. Non-compliant orders are subject to a 30% restocking fee. We reserve the right to dispute any chargebacks related to such orders.
YHM’s line of sRx products were designed with aesthetics and ease-of-use as the top priorities and that is no different for the YHM sRx Flash Hider (YHM-4405's). This Q.D Flash Hider comes in two variations (1/2 x 28" & 5/8 x 24") and it's compatible Q.D. Adapter/Mounting Interface attaches to the industry standard (HUB) 1-3/8” x 24 threads. It features an internal taper seal-in front of the threads-that locks your suppressor on and forms a tight seal to contain gasses while in-use. This means no gasses or debris can build up on the threads.
The sRx Flash Hider adds minimal length and weight to the suppressor set up while also allowing you to reap all the benefits of the new YHM sRx System-when used in conjunction with The sRx Adapter. The full YHM sRx (Suppressor Rx) System will be the obvious choice for someone looking for a sleek low-profile suppressor set up-that’s also built to withstand rigorous use. This is our prescription for the shooter who cares about the aesthetics of their build as well as its ease-of-use.
Muzzle device length is 2.3". Length added to barrel is 1.675" (on barrels with 0.6" threads).
Some of the exciting new benefits of the YHM sRx System are as follows:
- TIMELESS. (No need to shim/time to barrel)
- Small/low profile
- No moving parts
- Large taper in front of the threads allows for consistent mounting.
- Lighter than many Q.D. mounting offerings on the market
- Can be permanently attached to firearm barrel needed
- Length: 2.300"
- Diameter: .9375"
- Material: 4140 Steel
- Finish: Black Phosphate
- Caliber(s): 9mm (.390 diameter) or smaller
- Thread Size: sRx
The YHM sRx System-just what the doctor ordered!
Your Trusted Online Firearms Store – Shop with Confidence!
Looking for the best prices on YHM SRX QD Flash Hider 5/8×24 Thread by Yankee Hill Machine? All Things Firearm proudly serves Jacksboro with unbeatable pricing, expert service, and exclusive rewards.
Best Prices in Jacksboro
Earn Rewards on Every Purchase.
Safe & Secure Checkout – Shop with confidence using trusted payment options.
Compliance-Ready – All sales follow federal, state, and local firearm laws.
Limited Stock – Visit Us Today or Shop Online Before They’re Gone!
| UPC | 841812101550 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | YHM-4405-24 |
| Caliber/Gauge | .308 / 7.62 NATO |
| Length | 5.4500 |
| Model | sRx |
| Package Height | 1.4 |
| Package Width | 3.2 |
| Product Type | Accessory-Muzzle Brakes |
| Shipping Weight | 0.151 |
| Thread Pattern | 5/8"-24 tpi |
YHM’s line of sRx products were designed with aesthetics and ease-of-use as the top priorities and that is no different for the YHM sRx Flash Hider (YHM-4405's). This Q.D Flash Hider comes in two variations (1/2 x 28" & 5/8 x 24") and it's compatible Q.D. Adapter/Mounting Interface attaches to the industry standard (HUB) 1-3/8” x 24 threads. It features an internal taper seal-in front of the threads-that locks your suppressor on and forms a tight seal to contain gasses while in-use. This means no gasses or debris can build up on the threads.
The sRx Flash Hider adds minimal length and weight to the suppressor set up while also allowing you to reap all the benefits of the new YHM sRx System-when used in conjunction with The sRx Adapter. The full YHM sRx (Suppressor Rx) System will be the obvious choice for someone looking for a sleek low-profile suppressor set up-that’s also built to withstand rigorous use. This is our prescription for the shooter who cares about the aesthetics of their build as well as its ease-of-use.
Muzzle device length is 2.3". Length added to barrel is 1.675" (on barrels with 0.6" threads).
Some of the exciting new benefits of the YHM sRx System are as follows:
- TIMELESS. (No need to shim/time to barrel)
- Small/low profile
- No moving parts
- Large taper in front of the threads allows for consistent mounting.
- Lighter than many Q.D. mounting offerings on the market
- Can be permanently attached to firearm barrel needed
- Length: 2.300"
- Diameter: .9375"
- Material: 4140 Steel
- Finish: Black Phosphate
- Caliber(s): 9mm (.390 diameter) or smaller
- Thread Size: sRx
The YHM sRx System-just what the doctor ordered!
Your Trusted Online Firearms Store – Shop with Confidence!
Looking for the best prices on YHM SRX QD Flash Hider 5/8×24 Thread by Yankee Hill Machine? All Things Firearm proudly serves Jacksboro with unbeatable pricing, expert service, and exclusive rewards.
Best Prices in Jacksboro
Earn Rewards on Every Purchase.
Safe & Secure Checkout – Shop with confidence using trusted payment options.
Compliance-Ready – All sales follow federal, state, and local firearm laws.
Limited Stock – Visit Us Today or Shop Online Before They’re Gone!
| UPC | 841812101550 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | YHM-4405-24 |
| Caliber/Gauge | .308 / 7.62 NATO |
| Length | 5.4500 |
| Model | sRx |
| Package Height | 1.4 |
| Package Width | 3.2 |
| Product Type | Accessory-Muzzle Brakes |
| Shipping Weight | 0.151 |
| Thread Pattern | 5/8"-24 tpi |
Related Products
Online Only
Online Only
